Short answer: wrap a soft tape or a strip of paper around your wrist where the bracelet will sit, note the measurement, then add about half an inch for a close fit or three quarters to one inch for a looser one. Cuffs follow a different rule, covered below.
What you need
A flexible tape measure. If you do not have one, a strip of paper or a piece of string and a ruler will do. Measure the wrist you plan to wear it on. The two are rarely identical.
How do I measure my wrist?
Wrap the tape around the wrist near the wrist bone, where a bracelet naturally rests. Keep it flat and snug, not tight. Read the number where the tape meets itself. That number is your wrist size, not your bracelet size.
How much room should I add?
Add about half an inch for a bracelet that stays put. Add three quarters to one inch if you like it to move. Thick or heavily textured links take up room on the inside, so lean toward the larger number. A bracelet worn beside a watch usually wants the closer fit, so it does not ride over the case. More on that in the wrist stack guide.
How is a cuff sized?
A cuff is an open band, so it is sized to the wrist itself, with a gap at the back. Slide the opening over the narrow side of your wrist, then turn it into place. Do not bend a metal cuff open and closed each time you wear it. Repeated bending weakens metal, and over time it can crack.
What if I am between sizes?
Go up for chain and link bracelets, which sit better with a little drape. Stay closer for a cuff, which should not spin. If the piece is a gift, measure a bracelet the person already wears, laid flat, end to end.
Why fit matters at KAIN New York
KAIN New York makes its pieces as instruments, not decoration: something you feel on the wrist and return to during the day. A bracelet that slides to your knuckles or pinches is a distraction, not a reminder. Get the fit right first. For fingers, see how to measure your ring size at home.
KAIN. Worn intention.